Prince Albert Forklift Training Programs

Prince Albert Forklift Training Programs - Are you looking for a job as a forklift driver? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift check, fuel types and dealing with fuels, and safe use of a forklift. Hands-on, practical training helps participants in obtaining basic operational skills. Course content covers existing rules governing the utilization of lift trucks. Our proven forklift courses are intended to provide training on these types of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

Whilst the forklift is in use, do not lower or raise the forks. Loads should not extend above the backrest. This is due to the risk of the load sliding back towards the operator. Inspect for overhead obstructions and ensure there is adequate clearance before lifting a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

The lift truck is less stable when a load is in a raised position. Make sure that no body ever walks underneath the elevated fork. The operator must not leave the lift truck while the load is raised.

When handling pallets, forks must be level and high enough to go into the pallet and extend all the way below the load. The fork's width must provide equal weight distribution.

Prior to unloading or loading the truck, chock the wheels and set the brakes. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed to be able to support a semi-trailer that is not coupled to a tractor. The entrance door height should clear the forklift height by a minimum of 5 cm. Edges of docks, rail cars and ramps should be marked and avoid them.

Do not stay inside a lift truck for a long time without right ventilation. The inside of the truck must be properly lighted and free of trash, loose objects and obstructions. Inspect for holes in the floor. The installation of nonslip material on the floor will help prevent slipping. Clear whichever obstacles from docks and dockplates and make certain surfaces are not oily or wet.

Forklifts should not be utilized to push or tow other forklifts.

Click to Download the pdf